FM Ahesive

Squeegee Grade-VOC Squeegee Grade-HVMA

Uses:

Cold adhesive membrane for application in the horizontal field of the roof.

Cold adhesive is used in lieu of base asphalt. This product is a high strength SBS modified bitumen adhesive that provides excellent adhesion and elongation properties. It is also used to adhere SOPREMA membranes to acceptable horizontal substrates and to each other.

FM Adhesive Flashing Cement

Trowel Grade-VOC Trowel Grade-HVFA

Uses:

Adhere flashing membranes, adhere field membranes, as a mastic to set drain leads, penetration pockets, pipe flanges and gravel stops.

FM Adhesive Trowel Grade Flashing Cements are ready to use bitumen-based cold adhesives that contain a bituminous binder with sticking agents and solvents. “VOC” indicates that it contains a low solvent content. HVFA is a ready to use urethane asphaltic moisture cured flashing membrane cold adhesive with low solvent content. When using HVFA, all seams are either hot air welded or heat welded.

HVIA-II (High Velocity Insulation Adhesive II)

Uses:

Adhere approved thermal roof insulations and cover boards to acceptable substrates such as SOPRABOARD, vapor retarders, Gypsum Board, polystyrene and high-density wood fiberboard.

HVIA-II is a single component, elastomeric, moisture cured, low rise urethane foam adhesive that contains no solvents.

HVIA-III (High Velocity Insulation Adhesive III)

Uses:

Adhere approved thermal roof insulations and cover boards to acceptable substrates such as SOPRABOARD, vapor retarders, Gypsum Board, polystyrene and high-density wood fiberboard.

HVIA-III is a highly elastomeric, one step (two part), VOC compliant, all purpose foaming adhesive that contains no solvents and sets in minutes.