SOPRAFIX-e:

The SOPRAFIX-e membrane is composed of selected SBS modified bitumen applied onto a non-woven polyester reinforcement and is used in SOPREMA mechanically fastened multiple-ply SBS roof assemblies. It features a self adhesive five (5”) inch (127 mm) wide “flex” side lap which allows the seam width to be adjusted.

To learn more about SOPRAFIX-e and download a flyer, please click HERE.

COLVENT SA:

COLVENT SA is a semi-adhered field base membrane with a special elastomeric modified bitumen blend of SBS and other polymers with a glass mat reinforcement with a specific venting pattern of self adhered ribbon strips bonded to the underside along with a high brush sanded topside. Variations of COLVENT include: COLVENT 180 SA: 120 mils approximate nominal thickness

To learn more about COLVENT and download a flyer, please click HERE.

SOPRALENE STICK:

SOPRALENE STICK is a base ply composed of selected SBS modified bitumen applied onto a non-woven polyester reinforcement with self adhesive bitumen on the underside and a sanded topside surface.

SOPRALENE FLAM STICK:

SOPRALENE FLAM STICK features a film topside surface in lieu of sand.

MODIFIED SOPRA-G SAP:

MODIFIED SOPRA-G SAP is the first ply in a two or three ply membrane roof system where the cap ply membrane is heat welded to the base ply membrane. All self adhesive side laps are matted together and sealed using applied pressure. The top side is film.

MODIFIED SOPRA-G SAS:

MODIFIED SOPRA-G SAS is the first ply in a two or three ply membrane roof system where the cap ply membrane is heat welded to the base ply membrane. All self adhesive side laps are matted together and sealed using applied pressure. The top side is sanded.